PDA

View Full Version : williams 2 wont start.



Dave9202
30-07-2012, 12:03
Hi Peeps,
Have a slight problem with my Williams, Drove it onto some ramps the other day to do an oil change, drained the oil replaced with new, started the engine reversed it off the ramps got out and by the time I got round the front of the car it'd cut out. Now only turns over and will not start, I've checked for spark, not as much as a thought there should be but there is a spark, I've also checked for fuel there's fuel being pumped into the injectors and coming through the other side but like the spark to me it doesn't seem to have as much fuel coming through the injector as there's going in. Any help would be greatly appreciated. :-)

MatBrown
31-07-2012, 22:44
Check the earth points.

Dave9202
01-08-2012, 00:37
Check the earth points.
I'll take a look at them but I think they should be OK as about a month a go I had the engine out for a gearbox change and it was running sweet.
Thanks for the reply.