PDA

View Full Version : Engine parts for sale.



MattL
23-06-2012, 14:26
Hi,

been have problems with my engine for quite a long time so i have decided to break it up. after taking it apart its clear that cylinder one has gone a bit egg shaped causing it to smoke.

other then the cylinder, the rest of the bottom end is fine. its got APD Bolts and the oil pump has done about 200 miles. i will sell the bottom end with everything else that goes with it for - £20 pick up only

the head seems to be fine, it has been ported and 3 angle valves to be save i would send off to be checked before installing it - £100 pick up add £20 for delivery

3488

3490

3489

lightened and balanced Fly Wheel from Ktec costs £300 brand new. it has a bit of surface rust. £200 delivered

3491

3492

vernier pulleys and piper camshafts BP270. only done about 500 miles. £220 delivered

3493

3494

OMP straight through exhaust. warning very noisy. but sounds great. £120 pick up only

3497

williams manifold x2 £60 delivered.

3496

3495

rocker cover x3 one in blue £15 standard in good condition £25 standard in poor condition £10

Manifold inlet x2 £10 pick up only

head poor condition £10 pick up only


loads of other engine bits. so if you do come to pick anything up your more then welcome to look around.

im located at Portsmouth PO6

It might take me couple days to get back to you as i don't have access to the internet at home.

Thanks

ThRaXaIR
24-06-2012, 00:06
I have bought the Cams and pulleys. 23/06/12

MattL
25-06-2012, 18:16
cant get the images to work so im giving it another go

http://i174.photobucket.com/albums/w112/MaDMaN_039/P6230059.jpg

http://i174.photobucket.com/albums/w112/MaDMaN_039/P6230058.jpg

http://i174.photobucket.com/albums/w112/MaDMaN_039/P6230054.jpg

http://i174.photobucket.com/albums/w112/MaDMaN_039/P6230053.jpg

http://i174.photobucket.com/albums/w112/MaDMaN_039/P6230048.jpg

http://i174.photobucket.com/albums/w112/MaDMaN_039/P6230052.jpg

mckoci
25-06-2012, 19:52
Hello,
I would like to buy manifold + downipe .. is it possible to send it to the Czech rep. ?

Mrbrightsi
25-06-2012, 20:26
I'd of considered the exhuast, is it the mild steel one?

Shame you can't do delivery either.

MattL
26-06-2012, 19:27
mckoci pm'ed

i believe the exhaust is mild steel. at the moment i wont deliver the exhaust. if i don't get any interest in next few weeks for it. i will look into delivery after that

Wobba
26-06-2012, 21:56
That's a Williams Flywheel and head right?

What about the bottom end internals, pistons and rods? Are they standard Williams? And crank?

MattL
27-06-2012, 14:38
yes that's correct Williams Flywheel and head

all the bottom end internals seem fine.

manxseven
27-06-2012, 20:48
Hi Matt,

PM sent,

Cheers,

Simon

-jo-
28-06-2012, 07:59
just a question about the flywheel Matt, i cant see it in the picture but is the whole pattern (flywheel sensor, pick up) machined ?

MattL
28-06-2012, 12:08
Yes the flyewheel has bee machined to match the standard williams flywheel in almost every way. the only differences are the thread for the bolts are 7mm, i have still got the bolts i used for when it was fitted so i would send them as well, also it weighs only 3kg.

i had no problems swapping this over with the standard flywheel. no modification needed.

MattL
06-07-2012, 13:55
I need the block going so i will let it go for free. i am also open to offers on everything else

manxseven
06-07-2012, 15:46
Matt,
:oops:
YHM again,
Simon

Mikeb185
06-07-2012, 17:52
Do you have a williams fuel rail? Cheers

DanYellowHeadlights
13-07-2012, 18:53
where are you located mate?

interested in the bottom end!!

MattL
14-07-2012, 11:57
sorry Block and head have been sold
both manifolds have been sold

PM'd mikeb

flywheel £160 delivered
exhaust £70 pickup only

MattL
14-08-2012, 15:26
BUMP

Flywheel £130 delivered it is just under £300 brand new. only done about 500 miles

Exhaust £50 pick up only