View Full Version : Oil pressure sender - where?
Hi, my oil pressure gauge is not working (properly), and I suspect oil pressure sender needs to be replaced. But can anyone tell where it lives?
Cheers
Dennis
Its on the back of the block behind the exhaust manifold/down pipe. Its a round thing which screws in and has 1 spade type connecter in the top.
thx. And you can't see it when looking down from the top of the engine?
It helps when you know where to look. You should be able to see it tho
thx, will have a look. Replacing the sender is probably a fun job
Easy enough just fiddly with not much room.
16v_russ
30-04-2012, 00:12
Where is the best place to buy one from guys?
16v_paddy
30-04-2012, 01:32
Here's a pic, just below the F7R embossed bit is a heatshield & under that you'll be able to see the round black thing with a spade connection on top of it. That's the sensor in question, you can't really see it with the engine in there but it is accessible & requires a 19mm spanner to undo it :wink:
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2197.jpg
ok thx. I also hear that the gauges themselves could be in need of some tlc
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.