PDA

View Full Version : Bonnet badge



fabulicious
25-04-2012, 20:25
There are some bonnet badge's up for grabs on ebay at the moment. Yer man says they measure 72mm by 60mm but I measured mine and it is 70mm by 55mm give or take a mm or so.

Whats the jackanory with them so?

http://www.ebay.co.uk/itm/Genuine-New-RENAULT-BONNET-BADGE-Emblem-Logo-Clio-MK1-1990-1998-Sport-RSi-/300701488739?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Model%3AClio%7CCars+Type%3AWilliams&hash=item4603349663#ht_2922wt_754

MatBrown
25-04-2012, 20:54
Could be from a R19.

FATBOY
25-04-2012, 21:25
that is the correct part number for the bonnet badge. i bought one a while ago from this place...

fabulicious
25-04-2012, 21:37
For the 1 or the 3 FB? Are they all the same..

FATBOY
25-04-2012, 21:43
that was for the 1, im 99% sure there the same across the 3 models

fabulicious
26-04-2012, 09:58
Ah I know what it is..He is measuring from the back of the badge. 8)

snowman
26-04-2012, 10:05
Some early J & K reg 16V models had a ribbed bonnet badge rather than the later smooth one,not sure the Williams 1 had any of these but they only have 2 pins on the back instead of the later 3 iirc.

Suppose this would only matter if youve replaced the bonnet from an early valver