PDA

View Full Version : Loads of f7r/turbo williams and other various parts for sale



franksvalver
18-03-2012, 09:07
TOO MANY PICTURES. PLEASE PM FOR PICTURES

B&M Shortshift. Gearstick end. Comes fitted to the yellow bracket where it sits. Now £50

Good condition top gearbox mount and top engine mount. No movement. Bought in 2008 from renault. £50 for the pair

4th Mount and bracket. £30

Moongoose exhaust. New 6 months ago. Done just 2500 miles. Complete with 6inch flexi welded in £200

Forge dump valve. £50

FSE fuel pressure reg with external guage £50

Emerald ECU plus loom to connect straight into a valver/williams. £600 including map sensor, air sensor etc

Battery tray £10

JC5 172 box. Unknown 3rd gear crunch. £50

Rad £10

Turbo downpipe. £75

Scuttle induction kit for T2 type turbos £90

Soft clutch conv. £20

3litres of genuine elf 75w 80 gearbox oil. £5 a litre

Williams parcel shelf with zip up thingy. £20

16v 449 Bonnet, both wings, front bumper, tailgate £30, 20, 20, 30

400cc HIGH IMPEDANCE injectors. £100

550cc HIGH IMPEDANCE injectors. £200

Brake bias valve. Brand new from hispec. Comes with a few brand new unions and fittings. £45

Airtec rad. Perfect for chargecooler rad. Sat neatly in front of coolant rad. £60

JB3 with bolt-in-diff. Refurb from Renault in 2008. Original receipt to show. Less than 10000miles. Good strong box. £275

JC5 bought just last year from renault. COvered around 2500 miles. Perfect. £500

Both offside and nearside hubs. Brand new bearings. £40 each

Top susp mounts. £20 each

Turbines with 85% good r888s GG. £425

Full Samco Silicone hose set for Valver/Williams engine. In blue. £200

15mm Hubcentric spacers. £40

Polybushed dogbone. £40

Arch liners. £10 each

Pace chargecooler inc header tank, pipes, pump. £250

Baileys header tank £45

Rear discs. No lip, new bearings 2 years ago. Covered around 5k £30 for the pair

Williams exhaust manifold plus downpipe and cat welded to downpipe. £80 all in

Turbo TB adaptor £100

Nimbus heatsheild. Correct size for williams/valver £40

Williams oil guages £20

Valver/williams Throttle body £10

diditno
18-03-2012, 09:14
hey fella. im interested in the hubsentric spacers. how much delivered and how many? 2 or 4. and do they come with the bolts. p.s. or may collect ao where are you

franksvalver
18-03-2012, 09:26
Im only in ongar mate. More than welcome to collect.

There are 2 including bolts. Fit williams or turbines no rpoblem

JamieG
18-03-2012, 09:44
What condition is the bonnet in?

franksvalver
18-03-2012, 09:46
Striaght and true. One small 'fag burn' looking dent just above the drivers headlight. Mild scratching. Definately useable without worrying it looks shit

MG1980
18-03-2012, 13:03
How's the tailgate and driver's door buddy? Need seething rust and dent free!!

I'm not that far from you, so easy to collect!!

franksvalver
18-03-2012, 13:40
Tailgate is a valver not williams one mate. Still in 449.

Again it has scratches and the usual but would look to sad going striaght back on IMO. Unless its been damaged since I took it off :D

diditno
18-03-2012, 16:11
Im only in ongar mate. More than welcome to collect.

There are 2 including bolts. Fit williams or Turbines no rpoblem

Are you around tonight, around 5 or so. Gotta go to Danbury so can pick them up on the way through. Pm me your details if your around.

Thanks. Steve

franksvalver
18-03-2012, 17:08
PM d mate

cliowilliams174
18-03-2012, 22:09
how much for two front arch liners posted? cheers dean

franksvalver
18-03-2012, 22:11
Sorry dude, someone has dibbed those

diditno
19-03-2012, 16:24
picked some bits up yesterday. top bloke. free bump

zmaster2k
21-03-2012, 14:03
Will deffo vouch for frank hes a legend :)

franksvalver
21-03-2012, 18:47
Awesome free bumps thanks guys