PDA

View Full Version : Sticker positions.



binnsy
25-02-2012, 16:52
Hi Could someone please put up a couple of photos of the original rear 1/4 sticker postions please, as Im a tad confuddled (doesnt take much) !

thanks

fabulicious
25-02-2012, 17:40
Yours is a Williams 2 if I am not mistaken.
If I were you I would either go find another Williams 2 or ask people for measurements of the stickers exact location, provided that the sticker has been designed to the same spec as the original.

binnsy
25-02-2012, 17:46
yes it is a williams 2, ye thats all i need really the measurements the stickers are a direct replica of here so no probs on that front.

p4cks
25-02-2012, 19:34
Best I could find (not my car)...

http://i666.photobucket.com/albums/vv23/Smudger_Dan/P1000250.jpg

wrighty
25-02-2012, 19:36
If you look at the scan of my originals they are designed to sit against the side trim of the car and renault badge at the rear. I scan against different coloured car to allow you to cut them out and place accordingly!

Attached is the scan for your assistance!

binnsy
26-02-2012, 17:29
Cheers Wrighty,

Ive used the template this is why Im a little confused, the passenger side the sticker is flush were the "2" is with the end of the bump strip the drivers side which is obviously is reversed the "williams" part of the sticker is an inch away from the end of the bump strip if you know wot i mean?!

chill32
26-02-2012, 17:46
Yes that sounds right binnsy, that's how mine are on my Williams 2 and they're both original.

Charlie.

MatBrown
26-02-2012, 18:09
Yes that is correct.

binnsy
26-02-2012, 21:53
Cheers boys :D

MatBrown
26-02-2012, 22:29
Reason being is that the original ones didn't have a number so were positioned symmetrically, the numbers were an after thought.