PDA

View Full Version : DCOE Throttle bodies, semi kit



cliolord
21-01-2012, 22:39
DCOE Throttle bodies, back plate, trumpets, air filter & throttle body fuel rail with fuel pressure regulator. Contactless TPS not included but can be for an additional cost. There is a bit of damage to the air filter which has been patched up

£650 Posted £600 collected from Bristol

http://i15.photobucket.com/albums/a391/gazrawly/16012012920.jpg
http://i15.photobucket.com/albums/a391/gazrawly/16012012923.jpg
http://i15.photobucket.com/albums/a391/gazrawly/16012012925.jpg
http://i15.photobucket.com/albums/a391/gazrawly/16012012926.jpg

schakal
22-01-2012, 14:33
very interested .
what else is needed to complete this setup mate ?

cliolord
22-01-2012, 14:46
very interested .
what else is needed to complete this setup mate ?

ECU & wiring loom, inlet manifold, mapping. I would suggest omex 600 which would require a megane flywheel and clutch and probably a Ford crank sensor pickup with CNC'd bracket

schakal
24-01-2012, 10:59
very interested .
what else is needed to complete this setup mate ?

ECU & wiring loom, inlet manifold, mapping. I would suggest omex 600 which would require a megane flywheel and clutch and probably a Ford crank sensor pickup with CNC'd bracket

Quite a bit then , any idea of the rough cost ?
What about shorter rad or am i missing something ?

diditno
24-01-2012, 17:24
Sorry to high jack but I have a omex 600, 172 flywheel and clutch up for grabs if anybody need them to complete the above set up.

dg225
30-01-2012, 20:39
what filter is that, (i know its pipercross) but is it c500 or c601/2/3d as im trying to get one for mine as i have no filter, any help would be appreciated, cheers