PDA

View Full Version : Breaking my RSI-der hybrid



sideways danny
03-11-2011, 22:14
car is still bolted together so no pics of bits at the moment, but you all know what it looks like....

Omex 600 running v0.70 and clubman loom 500

OBX throttle bodies, originally honda fitment. Remachined to suit Megane head 350

Spax RSX coilovers. Damping adjustable R5 GTT fitment. Minor mods to fit on the clio (different spring cup) about 7 months old. Come with eibach camber bolts. 550

Spider F7R 712. no manifolds or cams (can find an inlet manifold if needed for small extra cost) 400

Engine with ITB's and catcams made 185.3bhp at SRR a few weeks ago. Only done 100 miles or so since

williams interior (seats, carpets, seatbelts) 150

Non PAS rack and column 50

Megane manifold and downpipe, 100. Can fit and make/mod a decat pipe for you by arrangement. Not selling the one i was running though.......bodged lol.

Will add to the list as the car comes apart. There's a good pair of driveshafts on there, and a number of parts I've replaced in the last year or so

email me dansherwal@hotmail.com, or call 07880 626200 (work phone)

This is the best pic of the bay I can find at the moment

http://1.2.3.12/bmi/i982.photobucket.com/albums/ae307/dantheman249/519%20Open%20Day/13.jpg

sideways danny
03-11-2011, 22:21
http://i133.photobucket.com/albums/q59/sidewaysdanny/RSI/13.jpg

sideways danny
03-11-2011, 22:33
deposit taken on Omex and loom

crazyasswhiteboy
04-11-2011, 13:05
how much for the engine mate and where abouts r you

16v_paddy
04-11-2011, 13:08
Spider F7R 712. no manifolds or cams (can find an inlet manifold if needed for small extra cost) 400


He's located in Bedford :wink:

Wobba
10-11-2011, 11:40
I guess the decat is a modded one as the downpipe flange is different to valver/willy?

sideways danny
10-11-2011, 14:48
yes, and it's been cut and welded for different setups so many times there's more weld than pipe. Flanges are warped too which is why it was blowing a bit at SRR