View Full Version : hill power head/cams
anyone on here had this work done? involves ported and polished head etc and cams/pulleys and chip to match site says 18-22bhp doesnt say how much i think iirc its about £1600.
Myers16v
13-08-2005, 19:16
nar, seems expencive
i am running 2l bottom end, piper cams, Chiped and maped ecu with few other bits. Bottom end 600 quid fitted cams cost 300 fitted ecu 250 ish.
I am running at 185.4 bhp and never had the silghtest problem, but i know that some people have.
but for upto 22 bhp 1600 seems too much
hope that helps :D
£300 fitted for cams, good luck even finding cams for that
Id rather pay 1600 quid and go to a tuner who has an indepth knowledge of the F7R such that he actually knows the difference between a Spyder engine and a Williams engine, rather than pay less and go to a 'so called' expert.
1600 is alot though
he would have to be god like for that kinda money
MatBrown
13-08-2005, 20:26
He did the work on my red 16v.
Mat.
but thats been put to rest by lesser modded cars now......hehe
Id rather pay 1600 quid and go to a tuner who has an indepth knowledge of the F7R such that he actually knows the difference between a Spyder engine and a Williams engine, rather than pay less and go to a 'so called' expert.
Thought you worshiped hillpower?.....now you are slagging him off :?
Be consistant :wink:
Dancliovalver
13-08-2005, 22:59
ive had that work done, never let me down, good top end, still pulls at 100mph and have had 155mph out of it, cant be too bad!! :wink:
VIPERONE
14-08-2005, 00:52
www.bumsniffers.com/king
www.bumsniffers.com/fred/andy/benr
www.biggaywheelboy.com/fred
That site smells :P
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.