View Full Version : #6035
robi1000
12-09-2011, 23:29
Completely restored in 2011. Low milage car with some mods. One of the few factory numbered Williams 2.
Car was on display at Renault stand at Ljubljana Auto Show 2011 as a part of the Renault heritage collection.
List of mods fitted or waiting to be fitted:
- High compression forged bottom end. Ported head with cams and adjustable pulleys. ITBs with custom inlet manifold. Clio Maxi kit car plenum and Gr.A airbox and scuttle induction. Near future plans include Megane Maxi exhaust manifold and Gr.A exhaust for trackdays and current Gr.N exhaust for weekend street use.
- Brembo 4 pot from Megane R26 and 280mm Clio RS discs on the front. R26 rear calipers on the rear. Near future plans include Gr.A 323mm floating discs on the front and 270mm Maxi discs on the rear.
- 172 hubs and adjustable GAZ coilovers fitted
- Gr.N exhaust
- Battery relocation (boot)
- Clear yellow fogs with yellow bulbs in headlights
robi1000
13-09-2011, 22:02
http://s7.mojalbum.com/10833367_17476324_19038801/avto-show-ljubljana-2011/19038801.jpg
http://s7.mojalbum.com/10833367_17476324_19038800/avto-show-ljubljana-2011/19038800.jpg
robi1000
17-12-2011, 01:16
http://shrani.si/f/O/4c/k0nrF69/williams2.jpg
robi1000
18-12-2011, 12:06
http://s7.mojalbum.com/10833367_17476324_19287622/avto-show-ljubljana-2011/19287622.jpg
http://s7.mojalbum.com/10833367_17476324_19287618/avto-show-ljubljana-2011/19287618.jpg
http://s7.mojalbum.com/10833367_17476324_19287614/avto-show-ljubljana-2011/19287614.jpg
your speedline corse looks just like mine. nice car you have !
robi1000
22-12-2011, 14:36
Thanks! I will change the rims because they have ET 53, I will probably take Compomotive in gold with ET 45.
Robbi,
Any pictures of the disc/caliper arrangement on the front hubs,please :wink:
robi1000
23-12-2011, 00:28
At the moment I have fitted 280mm discs and RS hubs, but with normal calipers. I have to fabricate adaptors to fit Brembos. In case you're still interested I can give you more pics of the current setup which fits nicely under 15'' wheels (both the CUP steelies and Williams rims).
willy3ams
23-12-2011, 15:31
[quote="robi1000"]http://s7.mojalbum.com/10833367_17476324_19287622/avto-show-ljubljana-2011/19287622.jpg
nice photo! :D
stunning mate! :D
but clear something up for me?
Clear yellow fogs
clear or yellow mate??? :?
stunning mate! :D
but clear something up for me?
Clear yellow fogs
clear or yellow mate??? :?
He means original Renault yellow fogs. Clear glass with yellow inside(reflector) instead of having yellow glass. :)
robi1000
23-12-2011, 21:17
:agree:
At the moment I have fitted 280mm discs and RS hubs, but with normal calipers. I have to fabricate adaptors to fit Brembos.
I would be interested in what 280 mm diameter disc you are going to use ,The R26 uses a 31mm x 28mm thick disc,the thickness 280mm diameter disc from AP is 25.4 mm and requires mounting bells etc.
Rod
The R26 uses a 31mm x 28mm thick
ooops meant 310mm diameter x 28m thick
Sorry Rod
robi1000
06-07-2012, 13:04
I plan on using Scenic 300mm x 24mm front discs until I save for AP racing or Alcon (on bells) 28mm thickness discs also around 300mm.
I think 24mm thickness should be fine while the pads are new. Not too good when worn tho.
Robi1000
I would be interested in the way you achieve putting the R26 Brembo calipers on the 300mm Disc under a 15" rim.I have tried practically every permutation of disc/brackets to use this caliper,but because of its overall length it becomes a major problem,when moving towards the edge of the disc.where the edges of the pads should be flush with the disc.
300mm discs and Brembo calipers go under 16" rim :winkey: For 15" I think 288mm is max. (depends on rim type), so 280mm is a safe way to go :)
robi1000
11-07-2012, 08:04
Yeah, I forgot to mention that I'll fit them under Speedline 2012 16''.
EDIT: You can still fit 280mm discs under 15'' without problems.
http://i67.photobucket.com/albums/h305/Cliorod/004-3.jpg This is a 305mm x 25.4 mm thick disc and Alcon calipers ,no problem under a 16" Speedline.
http://i67.photobucket.com/albums/h305/Cliorod/Picture1137.jpg
This is a 295mm x25.4 mm thick AP Disc and CP 5000 AP four piston Caliper which goes under a 15" 16 valve Turbine
robi1000
11-07-2012, 18:45
:droool:
Robi.
The AP set up can be for sale ready to fit ..ALL nuts,bolts and Mintex m444 ?? pads ...I can get others by request,most probably take about an hour :winkey: :grin:
I would expect the hardest thing :???: would be "plumbing" the brake pipes in :-(. All brackets and bells are in aircraft specification Aluminum,with hard anodising and the caliper mounting brackets have stainless inserts in the threads =D> In case a "ham" fisted mechanic ...Fooks one up :evil:
Rod
robi1000
08-01-2013, 18:55
Engine that will be fitted soon:
http://williamsclio.co.uk/forum/attachment.php?attachmentid=5418&d=1355125186
icenutter
11-01-2013, 15:16
I like the blue block.
robi1000
12-01-2013, 00:13
Thanks! :D
gustavo22
26-10-2015, 19:38
Very nice!!!!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.