PDA

View Full Version : compression testing



tutuur
06-09-2011, 19:18
does anyone have an idea on what i should be reading?
my willy engine has 325k km's on it and i was curious to how much compression lost it would have...

still put nearly 140whp on the rollers last year btw

sideways danny
07-09-2011, 00:47
I'd like to see around 170psi across all cylinders

tutuur
08-09-2011, 18:57
Did the test today and is was pleasantly surprised!
Reading from cambelt:
1: 185psi
2: 180
3: 185
4: 185

Not bad for a 16v engine with 325k km's on it :D

Also had the borescope in to check if there isn't much wear in the cyl. Wall but it's in perfect shape too!
Almost thinking it's been rebuild in it's life but i'm pretty sure it isn't...

dkrevs
08-09-2011, 19:32
It's quite possible it hasn't been rebuild yet, especially if engine was more or less on highway in it's life time.

tutuur
08-09-2011, 19:42
I personally know the last owner who owned it for 5 years. He used the car as daily and drove it from Hoorn to Amsterdam every day (40km). Never pushed it further then 2500tpm when the oil was not at 90 degrees celsius.

I knew i did good to buy the car from him! But this surprised me!
The engine does consume some oil but maybe that can be blaimed on the valveseals...

MAXIBOY
08-09-2011, 21:37
think these engines consumed oil even when new..

think its listed in the handbook somewhere iirc..

tutuur
08-09-2011, 21:58
But not 1L on 1000 km's :p
Does depend on usage though, and i have to confess i don't spare the engine! (when warmed up ofcourse)