Wishbone

[redeye83]

Hi all, is there a step by step process for changing them aswell as the ball joints. I've spent 3 hours doing one side. The ball joint just wouldn't come out. Doing the other side tomoz and didn't want to take so long.

[2 live]

if your really struggling mate. take the pinch bolt out of the balljoint, put the wheel back on, and lower car to ground. ;)

[16v_paddy]

Use a ball joint seperator & a lump hammer :wink:

[chip]

If you are struggling you probably dont have a decent enough balljoint splitter TBH, they come apart pretty easy with a decent size splitter and a decent sized hammer.

You could soak it in some penetrating fluid overnight though to help matters a little.

[16v_paddy]

and if you're still struggling use a bigger hammer :twisted: