View Full Version : Cat Cams verniers - Bolt size?
cliokongen
29-06-2011, 10:16
Help me - i simply can't remember.....
I need the thread size and lenght of the bolts.
M8x15?... M6x?....
Michael
M8 x 85mm.
Length of thread on the end is 25 or 26mm.
That's the main cam bolt, not the smaller ones.
cliokongen
29-06-2011, 14:20
It's the smaller ones i'm after... :D
Got loads of the others.
I want really low profile (flat head) strong bolts....
These are what came with my CatCam pulleys but the socket haed caught on the pulley cover so they were swapped for Dome Head type.
http://i6.photobucket.com/albums/y226/bluedragon101/catbolt.jpg
The threaded shaft is 11mm
Dia of the head is 12.6mm
Theyre M6
Hope that helps mate
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=290581258897
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=290581258897
While you are there ,can you tell me what are the ones to replace the rocker cover bolts please matey ?? :P
sideways danny
29-06-2011, 16:49
he wouldn't know about rocker cover bolts, he hasn't put any in his. sigh
;)
Depends on if you run Willy cover or Meg.
Off the top of my head, for Willy its M6x25.
Meg ones are longer.
Depends on if you run Willy cover or Meg.
Off the top of my head, for Willy its M6x25.
Meg ones are longer.
standard willy one mate , cheers :P :P
cliokongen
29-06-2011, 17:48
Certainly does Wobba.... Thanks!
Great link Snowman - i normally get my nuts and bolts from probolt.co.uk
Michael
Got outside ones fitted though cant remember size,deffo M6
I get a lot of mine from pro bolt too :wink:
These are what came with my CatCam pulleys but the socket haed caught on the pulley cover so they were swapped for Dome Head type.
http://i6.photobucket.com/albums/y226/bluedragon101/catbolt.jpg
The threaded shaft is 11mm
Dia of the head is 12.6mm
Theyre M6
Hope that helps mate
yep. deffo use the dome head ones. mine, like above aso caught on the inside of the cover when it was refitted.
cliokongen
29-06-2011, 19:39
I would never use the bolts supplied from Cat Cams.
They are soft in the material and to big to clear the cam cover as mentioned.
But the verniers are ok though...
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.