PDA

View Full Version : Breather hoses



andyleep
29-05-2011, 18:54
I have taken my induction kit off my williams 2 to put the standard box back on. I would like to know what type of bolts are used to bolt the housing to the throttle body as the induction kit ones are too short, and I only have one breather to attach to the box. There isn't another one to use, but the housing has two! Where is the breather meant to be?! Anyone help?!

Wobba
30-05-2011, 13:27
http://i174.photobucket.com/albums/w102/barneywobba/airpipes.jpg

Mat Brown will have some air box stud bolts and nuts.

andyleep
30-05-2011, 14:35
Superb! Thanks Wobba! So the airbox is fixed by studs in the throttle body and nuts instead of just bolts?

Wobba
30-05-2011, 14:44
Yea they are, but I have seen some which are bolts as well, but these are only fitted because someone has lost the correct ones and are a substitute.