Lots of bits and bobs!

[matt.dixon90]

-shortened radiator for itbs, valver fitment, £100 posted
-Bosch 802 injectors, just been refurbed and comes with new seals £60 posted ***SOLD***
-Front Bumper, in good nick, just needs spraying
-Ported Valver Head by Hillpower, just been rebuilt with new stem seals. comes with lifters. No Cams, freshly skimmed £220
-Subframe, freshly powder coated lime green, £60
-Valver Wishbones freshly powdercoated lime green fitted with brand new powerflex bushes and new ball joints - never fitted to car, £120
-Kent Cams vernier pulleys, £50 posted ***SOLD***
-Superchipped Valver ECU, £80 posted
New Gates timing belt. £50 posted
Stiff Shift kit from Yanoo on WC, never fitted - £30 posted
2 green Toe Straps - £5 posted each
New smoked side repeater plastics - £8 posted
New Fuel filter - £5 posted
New Intermotor inlet air temp sensor - £7 posted
New Powerflex polybush ARB mounts for Valver, inside and out - £45 posted
Idle Control Valve, in good working condition, sprayed silver - £20 posted
New Intermotor Crank Sensor - £15 posted
New Power Bost valve/ Fuel pressure regulator, never fitted, comes with instructions - £50 posted
Valver Wishbones, freshly powdercoated lime green fitted with Powerflex Polybushes - £100
New Outer ARB mounts x 2 - £7 posted
New Trackrod ends - £15 posted
New Genuine Clutch pedal, costed me £90 from renault, bought it as i thought mine was shot, turned out mine was fine so its sat round. £50 posted
New Water pump - £25 posted
Forge Polished Header Tank - £55 posted

Williams manifold and down pipe fitted with new fire ring - £50 collected or posted for £65
Williams wishbones, will need new bushes - £25 collected
Good Lambda sensor - £10 posted
Williams Dials, speedo only - £40 posted


Open to offers :)

[ThRaXaIR]

Caution advised...

[matt.dixon90]

caution advised why?

[ThRaXaIR]

lot of scams going around, low posts and all that. also why have things sold even though you only just posted the thread up?

If your legit then sorry. :P

Can people come and collect from you? where u based?

cheers.

[wil4s1]

the adverts already up on clio16valver and has been for a bit, guys located in blyth.

There is a lot more pictures in the thread on c16v for anyone thats interested and has access.

[ThRaXaIR]

then my apologies and good luck with your selling! it just upsets me when people get robbed of their money!

No harm intended. :D

X

[matt.dixon90]

haha its ok bud. Yeah im happy for people to collect, Im live in Blyth

No scams here :)

Unfortunatly hard times are forcing me to sell up :( had all those bits waiting to go on my turbo project.

[matt.dixon90]

Shortened rad
Wishbones
Subframe
Powerflex ARB Bushes
Willy Manifold and downpipe
Header Tank

All provisionally sold pending payment

[matt.dixon90]

i also found:

PTFE Gasket set from Paddy, set of 3. never fitted, ill take £45 posted for them

Fuel rail freshly powder coated, never fitted, can include a set of injectors, not sure on condition though, £20 posted

Brand New front wheel bearing, £16 posted