need help on getting a inner cv boot

[acerimmer]

yes am after the inner cv boot. for the o.s, took the drive shifts out when the engine came out and by the look of it they where both cracked so i orderd both outer and inner boots. The outer went on fine but all the inner boots ive ordered or looked at are all round, where as the inner one is moulded to fit the drive shift that fits to the gearbox. Is it only reno that sells these or is there a company that do um, ive ran out of places to ring near me.

[northy]

always had good results from these guys, tell them williamsclio sent you.

http://www.cvjoints.co.uk/

[acerimmer]

cheers dude ill give um a try in the morning, :D

[acerimmer]

always had good results from these guys, tell them williamsclio sent you.

http://www.cvjoints.co.uk/

HI mate, am not sure if these people are still goin, ive tried ringing them and left a few emails and ive got nothing in reply, unless they have changed numbers thats whats on there website. I will send 1 last email then after that looks like its down to rip off reno :cry:

[Wobba]

You probably want part number 7701465911.

http://i174.photobucket.com/albums/w102/barneywobba/Suspension%202011/gaiter.jpg

Mine is the same as shaft version 2.

[acerimmer]

yeah so is mine, are all williams the same or are some differant. mines a willy 3

thanks

[acerimmer]

You probably want part number 7701465911.

http://i174.photobucket.com/albums/w102/barneywobba/Suspension%202011/gaiter.jpg

Mine is the same as shaft version 2.

yeah i ordered this too, but it anit the same as mine. took it to reno they dont have a clue at the min.. is there anywhere that sell complete drive shafts, by the look at it i may have to buy one if i cant get the right boot. And am not paying £250 reno wants for a new fuker.

[Wobba]

Driveshafts with joints and boots all pre-made:

http://www.carparts-direct.co.uk/?i=403&ModelDetail=RENAULT+CLIO&ii=381707&p=12

Make sure you confirm the Willy one is longer than the valver spec...for some reason they are listing the valver as a 2.0L.

I rang them as they had the wrong one listed (same as valver one) and they sorted the right one for me.

[acerimmer]

yeah tried them, they want £201 for 1, ive not got that at mo. so just tring if i can find one to fit mine, it seems its not a genuine reno part because noone seems to have 1 to fit, ive posted up some pics of the 1 i have if anyone has any info on it, it would be nice.

http://i1125.photobucket.com/albums/l582/acerimmerxxx/Photo0080.jpg?t=1305228402http://i1125.photobucket.com/albums/l582/acerimmerxxx/Photo0081.jpg?t=1305228402http://i1125.photobucket.com/albums/l582/acerimmerxxx/Photo0082.jpg?t=1305228402

[Wobba]

There are places that refurbish driveshafts. Could be an option. I've not found anyone who supplies those inner gaiters :(

[acerimmer]

There are places that refurbish driveshafts. Could be an option. I've not found anyone who supplies those inner gaiters :(

wobba thanks for your help mate ive tried the web sites you said, to get a recon drive shaft is my last opsion as i priced up for 1 n its looking at £201, reno wants £230 for one, ive a coulpe of weeks to find one as i like to drive it lol.

just a quick one for u, specking to a mate who races minis might who of u, do u or have a mate thats big in 205s with mi16 engine not sure if i got my wires crossed on this...

thanks agin

[sideways danny]

you can get that boot from renault, comes as a kit with new clips and a tube of grease. It's about £20

[acerimmer]

you can get that boot from renault, comes as a kit with new clips and a tube of grease. It's about £20

ok, do you know the part number or what sort of car its off, thanks

[sideways danny]

just found the pictures burried in my photobucket!!!

http://i133.photobucket.com/albums/q59/sidewaysdanny/IMAG0032-1.jpg
http://i133.photobucket.com/albums/q59/sidewaysdanny/IMAG0031.jpg

kit is about £50 now though after checking with renault parts department :(

[acerimmer]

thanks dude for that post, yeah i had a look under a 03reg clio and it looked the same as my driveshaft. Still looking but not important at the mo, sort of made one to fit, its on the ramps at work everyweek having something done to it and keep checking the driveshaft.

thanks for your help mate