View Full Version : simple one for you...
ThRaXaIR
10-03-2011, 16:34
is the inlet manifold and throttlebody the same on a f7p and f7r?
cheers
depends on what car it is from.
Valver yes - R19 no. As the design of the inlet manifold is differant.
ThRaXaIR
10-03-2011, 16:45
ok im thinking 16v f7p into a williams f7r? so all good then? cheers mr North
I've you're taking the inlet manifold from a 1.8 16v removed from a CLIO, then yes they're the same and it'll fit on an F7R Williams engine no problem.
To be fair, even if you used a Renault 19 manifold and throttle body, it'll still fit, it's just slightly different.
I've you're taking the inlet manifold from a 1.8 16v removed from a CLIO, then yes they're the same and it'll fit on an F7R Williams engine no problem.
To be fair, even if you used a Renault 19 manifold and throttle body, it'll still fit, it's just slightly different.
the mouth of the t/b is totally different .
also is it not the case that accelerator cable ends are different too ??
zmaster2k
11-03-2011, 08:27
I've you're taking the inlet manifold from a 1.8 16v removed from a CLIO, then yes they're the same and it'll fit on an F7R Williams engine no problem.
To be fair, even if you used a Renault 19 manifold and throttle body, it'll still fit, it's just slightly different.
Not with stock airbox I doubt!?
I'm not saying anything else would fit, i was merely saying the inlet manifold and throttle body would fit (not that they'd be much use in a clio)
Should have made that clearer!
:oops:
volymmannen
11-03-2011, 21:44
Its a big difference on F7R Megane and F7R Willams
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.