cam carrier bolts

[shag]

any body know the torque settings for cam carriers bolts dont know weather they have to be torqued down or just nip um up also it looks like its machined fit do they need sealing before i put them back on cheers

[robi1000]

It's supposed to be machined fit, but due to aging they sometimes warp and don't seal anymore.

[cliokiz]

I put a tiny bit of silicone sealant on mine, just in case.

Pretty sure the inner 10mm hex bolts are 10nm, and the outer torx bolts are 25nm.

[cliokiz]

Here we go:


6mm bolts - 10nm (inner)
8mm bolts - 24nm (outer)

[shag]

cheers for settings cliokiz