seat removal?

[H12EEG]

hi guys as title states how do i remove the seats from my williams 3. have got the drivers side out but have left the runner on the hand brake side in as the bolt looks weird is it bolted from the bottom up?

[MatBrown]

Yeah, they are held in by 4 nuts/bolts each seat.
The outside two are T40 torx and are done from inside the cabin.
The inside two are 13mm and are done from underneath the car.


Mat.

[Coops]

or you can leave the inner runners in the car and undo the 3 smaller torx bolts from the top inside the car

careful as this will also release the bar you use for moving seat back and forth, so be wary of it popping free

[H12EEG]

cheers for the info guys decided to take them out completly as leaving them in only adds weight :D