Patrick_g46
25-11-2010, 22:54
For sale here is a set of Pug 406 Brembo callipers that are direct fitment to Mk1 clio hubs along with all other nessecary parts to get this package up and running on your car.
The callipers are in good working order and I have removed the sliders and removed any corrosion before greasing and refitting them (common problem on brembo callipers). I have also stripped these callipers back down to bare metal before using a high temperate enamel finish red paint on them which has come out looking very nice. I also have a set of Brembo stickers ready for application should you so wish.
With these callipers I have the following for sale:
- Brand new in box Mintex Pads
- A set of brand new front HEL braided lines.
- A set of used but still plenty of life left 172/182 280mm front discs.
- 2x 20mm hubcentric spacers (eibach I think) that will be needed to fit the above
- 8x longer wheel bolts to allow for the spacers.
The only other thing you will need for this is 4x 3mm thick washers that will sit between the calliper mounting face and the hub. This is essential to centralise the calliper over the disc.
So all in all this is a complete brembo upgrade package ready to bolt on!
I am looking for £350ono for the lot collected from N.London (N21), or I can arrange delivery at extra cost.
http://i200.photobucket.com/albums/aa235/Patrick_g46/Brembo%20refurb/100_1987-1.jpg
Thanks
Patrick
The callipers are in good working order and I have removed the sliders and removed any corrosion before greasing and refitting them (common problem on brembo callipers). I have also stripped these callipers back down to bare metal before using a high temperate enamel finish red paint on them which has come out looking very nice. I also have a set of Brembo stickers ready for application should you so wish.
With these callipers I have the following for sale:
- Brand new in box Mintex Pads
- A set of brand new front HEL braided lines.
- A set of used but still plenty of life left 172/182 280mm front discs.
- 2x 20mm hubcentric spacers (eibach I think) that will be needed to fit the above
- 8x longer wheel bolts to allow for the spacers.
The only other thing you will need for this is 4x 3mm thick washers that will sit between the calliper mounting face and the hub. This is essential to centralise the calliper over the disc.
So all in all this is a complete brembo upgrade package ready to bolt on!
I am looking for £350ono for the lot collected from N.London (N21), or I can arrange delivery at extra cost.
http://i200.photobucket.com/albums/aa235/Patrick_g46/Brembo%20refurb/100_1987-1.jpg
Thanks
Patrick