PDA

View Full Version : whats it worth?



walters300
22-10-2010, 18:09
testing the water here as i have just bought a sealed 197 cup racer engine which i am going to stick in my w3 and maxi kit that if i can sell this 8)

This has been my prototype to see what i would do to my w3, its been a dimma and know its a maxi, williams engine with wossner low comp pistons which cost 3k to build, less than 500 miles since rebuild, car runs perfect with low boost chip but needs the boost setting to 9psi, rolling road and KJ will sort it.

at the moment i have 2 cars needing work and 1 is enough, so i am going to take all my observations and build them into the 3,


good bits
1. new engine fully rebuilt and done properly
2. maxi kit fitted with redesigned dimma rear wings
3. clio 182 brakes
4 .full 2 1/2 stainless exhaust
5. 17" prima maxi replica wheels with 90% toyo proxies
6. lightweight aluminium spacers all round to get the correct stance.
7. williams clocks etc.
8. very good shell with only minor rust on front light sockets and usual inner wings, easy job!

bad bits/ jobs to do
1. weld above comments and roof skin/ sunroof supplied if not wanted.
2. gearbox had a little clicky noise and may need a rebuild.
3. suspension needs changing.
4. no front seats
5. bits ive changed need painting
6. windscreen required.

pic below

walters300
22-10-2010, 18:12
I have reached my 2MB limit so PM me for a pic if :wink:

walters300
22-10-2010, 18:52
http://www.williamsclio.co.uk/forum/viewtopic.php?t=36925 last pic is how it is now

walters300
22-10-2010, 18:55
if i cant sell the whole car i will sell the turbo set up if you give me a hand to take it out, all offers considered :)

dimma
22-10-2010, 19:46
where is the car? im from northern ireland.

walters300
22-10-2010, 19:56
its in cork about 5hrs from you id say, if your ever down call in for a look :wink: