PDA

View Full Version : Rear brakes pad holder



fab
18-10-2010, 08:21
What would you call the part that the pads on the rear sit into? I'm missing the little black block that has/had a little clip attaching it to the holder. Is it important?

sideways danny
18-10-2010, 13:12
are you talking about the fitting kit?

http://cgi.ebay.co.uk/FERODO-Rear-Brake-Fitting-Kit-PEUGEOT-106-GTi-RALLYE-/260517655532?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3ca80ff3ec

Wobba
18-10-2010, 13:37
Think he means this?

http://i174.photobucket.com/albums/w102/barneywobba/Leighannes%20Willy/DSCF0377-1-1.jpg

fab
18-10-2010, 15:07
X marks the spot where I'm taking about the holder.
And the red block area there is/was a black piece that was pushed up against the pad that gets screwed in. Thats the part I'm missing from one of the holders.
Looks like you dont have them on yours wobba? But it looks like it keeps the pad from touching the wall of the holder.

http://i21.photobucket.com/albums/b300/fabtrader/DSCF0377-1-1.jpg

Wobba
18-10-2010, 16:09
You mean the tab on the back of the pad itself? Only need one on each side with a tab. Make sure you've not done the usual mistake of putting two with the tab on one side already.

See the piston? See the tab that's not located correctly in the above pic? That tab needs to slot into the gap on the piston. Dont need it on the outer pad. Outer pad should have screw holes in so you can secure it with the two supplied torx screws to the calliper itself.

katbloke
18-10-2010, 17:02
not the lead weight bit?

http://i120.photobucket.com/albums/o189/katbloke/009.jpg

fab
18-10-2010, 17:44
Yep the lead weight bit. do they serve an important purpose?
I'm ok with the tab bit wobba, got them in correctly to the piston :wink:

katbloke
18-10-2010, 18:31
I think its an anti rattle shim kind of thing, apparantly does nothing, but i refit because i have them, if they drop off i wouldnt bother sourcing more

fab
18-10-2010, 18:51
ok thats 8)
all i need then are those fitting kits sideways danny posted a link to and i'm sorted with the brakes :wink:
With my zorst and i imagine most of you lads also we aint gonna here a pad rattling :D
thanks again.