PDA

View Full Version : Indicator/Light Stalk - Electrical issue



fab
22-09-2010, 15:00
how do you know if its foobar?

If I switch on the hazards (with ignition off), the rear cluster is fine but in the front the parking lights flash instead of the indicators?
If I disconnect/unplug the indicator/light stalk still the same problem. Logic would tell me it's not the stalk and something else.

With ignition on, when I turn the lights on to main beam or trigger the indicator left/right or use the hazards, the wipers come on :evil:

double/triple checked all the earths around the engine bay. checked all fuses and bulbs are ok. went over the wiring loom in the engine bay also and all appears in place.

bypassed the immobiliser unit also and still same.

any suggestions?

fab
29-09-2010, 20:10
Solved.
The culprit :oops:
http://i21.photobucket.com/albums/b300/fabtrader/FrontLoopEarth.jpg

Was spraying the area around the rad and slam bar and...