View Full Version : Dropping rear beam
Difficulty level? What do I need to watch out for?
The exhaust I have needs to come off and be replaced with the other one, but it does not have a removable u-bend so may need to drop beam or get a garage to do it on car lift...
imo just get garage to do it,hell of a lot less hassle.altho its basically just four big bolts
Yea, that's what I was thinking, had that planned originally as I dont want more hassle just before trackday.
You don't need to drop the rear beam to remove an exhaust with a fixed U bend
Just get it up on a ramp and remove the centre section, then swing the back box and U bend over the rear beam.
You don't need to drop the rear beam to remove an exhaust with a fixed U bend
Just get it up on a ramp and remove the centre section, then swing the back box and U bend over the rear beam.
One the Oreca system i have (same as Wobbas) i have to slightly lower the rear beam.
buy a exhaust chain cutter and cut the pipe and buy a through clamp! sod taking the beam off lol
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.