View Full Version : Crank locking pin
robi1000
15-08-2010, 10:20
Can anyone tell me what shape it is? I think it's M8 bolt (or whatever fits directly into the thread once you remove the plug). Can I just screw it in or is it machined at the end so it fits in the groove on the crank nicely?
Justin..
15-08-2010, 10:55
I just slot the biggest allen key that fits in.
robi1000
15-08-2010, 11:07
I just slot the biggest allen key that fits in.
Tnx for this info! :thumbsup:
I'd still like to make a proper one for future use, so any dimensions are still welcome!
i think its is 7mm pin with a locating thread on the end that screws in the block..
http://www.justoffbase.co.uk/core/media/media.nl?id=45612&c=317638&h=750ed6bc7c16af93fc0a
http://www.tooled-up.com/artwork/ProdPDF/VS122.PDF
try an 7mm and 8mm bar..
then drill a bolt central and inset the bar
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.