View Full Version : chamade meets The 9 ...
for the first time after the respray :D
http://i28.photobucket.com/albums/c249/evrenfenci/thefullshebang.jpg
not long after this photo was taken ,the 9 was on the way to mot .
she did fail but not so hard i am happy to say ,so she is going back for the retest tomorrow :P
more pics of the whole setup very soon ...
MatBrown
11-08-2010, 21:22
For someone with no taste in cars they are quite nice!
Mat.
FFIIIIIGGGGGGGGGHHHHHHHHHHHHHTTTTTTTTTT
Clio-Girl
12-08-2010, 10:59
i want more pics of the 9 please :D
i want more pics of the 9 please :D
Same here! :)
For someone with no taste in cars they are quite nice!
Mat.
from what you say up there ^^^
you sound like the type of person that would go to a lesbian bar
and order beer .
they will eventually figure out you are a gay boi in drag :D
FAIL !!!
i see your point though ,nice camper in the background 8)
i want more pics of the 9 please :D
she fly passed the retest today .
needs a good all over clean and fitting some interior trim bits .
staying in a body shop for too long ,there is filler dust etc all over the
place at the moment .
http://i28.photobucket.com/albums/c249/evrenfenci/S8004371.jpg
http://i28.photobucket.com/albums/c249/evrenfenci/S8004373.jpg
http://i28.photobucket.com/albums/c249/evrenfenci/S8004372.jpg
http://i28.photobucket.com/albums/c249/evrenfenci/S8004377.jpg
http://i28.photobucket.com/albums/c249/evrenfenci/S8004375.jpg
http://i28.photobucket.com/albums/c249/evrenfenci/S8004376.jpg
http://i28.photobucket.com/albums/c249/evrenfenci/S8004381.jpg
http://i28.photobucket.com/albums/c249/evrenfenci/S8004384.jpg
:P
Justin..
12-08-2010, 19:02
pics of roof after first track day are a must :P
pics of roof after first track day are a must :P
i will strap you on top . it`ll still be reet :P
Justin..
12-08-2010, 19:19
:lol:
my main worry at the moment is the slight oil leak i still have
on this engine . after a short run i park up there is a little pool under the
drivers side wishbone :evil:
i am hoping its not the head again .
Looks great mate!!!!
How mcuh have you driven it? I had an oil leak like that but it sorted itself out, I think its where I had to fit the tappets and some residual oil forced its way out.
Clean it up and drive it about a bit more and keep eye on it.
Looks great mate!!!!
How mcuh have you driven it? I had an oil leak like that but it sorted itself out, I think its where I had to fit the tappets and some residual oil forced its way out.
Clean it up and drive it about a bit more and keep eye on it.
thanks Wobbs :D
only driven it to mot and back around 8 miles ,tried to be low
on revs as well .
the problem is i dont know where the oil is exactly coming from .
opened the cam belt cover and had a quick look and it does not seem to
be coming from there but with spanking new clear oil its really hard to see where the hell its coming from :?
Well, keep an eye on it and oil levels and maybe it will become clearer as time moves on. I would have looked there first as well!
MatBrown
13-08-2010, 18:19
Maybe just residue from the leak before it was fixed?
Mat.
Maybe just residue from the leak before it was fixed?
Mat.
no its not mate , there is a leak somewhere
Mine was just residue :(
Hope yours is not another 'back to Craig' jobbie :(
Like the "worry beads" on the gearstick matey :D
Have you located oil leak then?
not sure , i think it might have stopped but i now have a water leak
from driver side . might be one of the water pump bolts .
still messing with the wide track adventure before i can happily drive the fokker. managed to get longer shafts ,modified front shocks to a wider spec with brand new koni inserts in them . i will see how much thread is going into the track rod after a proper laser tracking and see if i will have to
use longer track rods as well .
all good fun ,just cant wait to drive it :P
What kind of parts did you used on the 9 to get Widetrack?
What kind of parts did you used on the 9 to get Widetrack?
-megane subframe (pushing wishbones 15mm further out )
-megane shafts (15mm longer than 9 ones)
-19 16v track rod ends (these are longer than 9 ones to take the 15mm -extra but also give some castor )
-custom made shock absorber shells with hub mounting holes 15mm further out. got koni inserts in these originally made for a 19 16v .
-megane arb 24mm
Wishbones are stock R9 or something else? I don't know a lot about R9 front suspension, so on which other Renault car is it based? Clio? R5?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.