robi1000
03-08-2010, 23:47
How thick are rear bars with rubber coat intact? Because I currently have a valver in my workshop and after I measured thickness on a valver and then on my Williams, there was a 1mm difference and both have rubber coat on them. Aren't they supposed to be the same?
My measurements:
Williams: 24,5mm and 27mm
Valver: 23,5mm and 26mm
Remember, I measured with rubber coat on the bars. So how thick are the bars if I'd remove rubber coat?
My measurements:
Williams: 24,5mm and 27mm
Valver: 23,5mm and 26mm
Remember, I measured with rubber coat on the bars. So how thick are the bars if I'd remove rubber coat?