View Full Version : head studs
i took the cylinder head of my williams 2 to replace some bent valves and i was wondering do i need to replace the head bolts or can they be used several times before needing replaced.
Laine_16v
26-07-2010, 23:06
Headbolts are single use on F7P/R
i forgot to say the head needs skimmed.can that be done?
yes and bolts are 15 quid a set
ive got one of those haynes books and it says in it that you cant skim the head on a f type engine.
You really should have it tested and skimmed if needed.
ive got one of those haynes books and it says in it that you cant skim the head on a f type engine.
lol, that's funny, mine was skimmed.
when its skimmed will a standard head gasket do ?
yes. I had mine skimmed nearly .5mm and was fine on a std gasket.
yes and bolts are 15 quid a set
are these available on ebay?
and does anybody have experiance with the Cylinder Head 12.9 tensile M10 x 100mm socket head cap screws?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.