View Full Version : Clio cup sequential box
Whats needed apart from the box are the shafts different, would i need to fit 182/182 hubs and wishbones to use the Cup driveshafts ??
Any help...
yeah shaft and of course the gearchange not sure on hubs as i think its only the bearings that need changing
robi1000
29-06-2010, 21:52
I know Maxi had 31 spline hub (williams is 21 iirc).
zmaster2k
29-06-2010, 22:19
Steve, give Ktec a call, they have one in their demo car, (and have swapped it from most of their cars, (5 turbo, Clio mk1 172 turbo, 172 bodies etc etc)
very helpful tbh
Whats needed apart from the box are the shafts different, would i need to fit 182/182 hubs and wishbones to use the Cup driveshafts ??
Any help...
shafts, all the wiring, full throttle change/cut etc etc etc.
The option i have is St75-14 box (better than the UK cup car box and what was used in the cup cars abroad) Shafts and gear lever etc
So its all about what i need to change to mine to accomodate the cup shafts:-
172 hubs (to match the splines) ?
172 bottom arms to accomodate the driveshaft length etc?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.