Clio cup sequential box

[Evogone]

Whats needed apart from the box are the shafts different, would i need to fit 182/182 hubs and wishbones to use the Cup driveshafts ??

Any help...

[MAXIBOY]

yeah shaft and of course the gearchange not sure on hubs as i think its only the bearings that need changing

[robi1000]

I know Maxi had 31 spline hub (williams is 21 iirc).

[zmaster2k]

Steve, give Ktec a call, they have one in their demo car, (and have swapped it from most of their cars, (5 turbo, Clio mk1 172 turbo, 172 bodies etc etc)

very helpful tbh

[2 live]

Whats needed apart from the box are the shafts different, would i need to fit 182/182 hubs and wishbones to use the Cup driveshafts ??

Any help...

shafts, all the wiring, full throttle change/cut etc etc etc.

[Evogone]

The option i have is St75-14 box (better than the UK cup car box and what was used in the cup cars abroad) Shafts and gear lever etc

So its all about what i need to change to mine to accomodate the cup shafts:-

172 hubs (to match the splines) ?
172 bottom arms to accomodate the driveshaft length etc?