PDA

View Full Version : Chipwizards remap result



rochdale_williams
25-06-2010, 08:20
Took the Williams to Wayne yesterday for a remap, sorted my overfueling issue, cured the low down flat spot. It's like a new car. Smoother and goes well. Highly recommend. End result 188.7 bhp. And a lovely laminate print out for the history file.

northy
25-06-2010, 09:12
whats that at the wheels ?

Coops
25-06-2010, 09:16
whats that at the bank balance? ;-)

Evogone
25-06-2010, 09:27
whats that at the wheels ?

about 155 approx.

rochdale_williams
25-06-2010, 10:11
Came to 300, would have been a little more if he'd have had to put the chip carrier in, but already in there. So is all good. Saw his hyabusa powered cappuccino too. Search it on you tube. It's immense. He's only 10 mins away so lucky really

Wobba
25-06-2010, 11:04
Took the Williams to Wayne yesterday for a remap, sorted my overfueling issue, cured the low down flat spot. It's like a new car. Smoother and goes well. Highly recommend. End result 188.7 bhp. And a lovely laminate print out for the history file.

Great results! More power than e, and I bet it drives smoother too!

rochdale_williams
25-06-2010, 11:18
I'd honestly say take yours to Wayne, is a trek, but worth it. He'll tell you straight what's going on.

2 live
26-06-2010, 11:50
I'd honestly say take yours to Wayne, is a trek, but worth it. He'll tell you straight what's going on.


iv already told him a couple of times mate. i just hope he doesnt go the same way as jon and end up spending what he did to get it rectified after, then finally admitting defeat and going to wayne to get it done right.


do it right ..........do it once......take it to wayne mate.

zmaster2k
26-06-2010, 12:04
nice whats the spec?

rochdale_williams
26-06-2010, 13:26
Stage 2 hill power headwork and cams, de cat, v6 airbox scuttle intake, straight through system. Unsure of cam make. Wayne reckons we can go more aggressive with the timing. But engine seems to have worn rings so will do timing with new lump in. Going. York dragway next Sunday to see how she goes. Looking at weather should be a cracking day

Laine_16v
26-06-2010, 13:33
Will be piper cams of some desciption if they came from hillpower :)

rochdale_williams
26-06-2010, 13:42
Good times then :D hopefully theyll have verniers to match. Will have to get some cash together for a spare engine to rebuild then swap over. Or maybe just a bottom end if the heads been worked.