PDA

View Full Version : bonnets



neil_w03
09-06-2010, 22:06
hi, this might seem a daft question, but ive got a bit of an issue.

ive put a f7r into a 1997 1.4 maxim, everything works perfect, but the bonnet is rubbing on the head of the engine. ive had a quick look round and cant seem to find a valver/williams bonnet (with the vent) in pahse 2 style. are they avaliable or am i wasting my time?

any help or tip appreciated. cheers
neil

Coops
09-06-2010, 22:47
nope, all valvers/williams had the more manly square headlights. you can simply swap your headlights as well though to fit a valver bonnet. it will fit direct to a phase 3 front end inc the front bumper

neil_w03
09-06-2010, 22:53
thought that was the case, that may have to be the way forward then. thanks

diditno
09-06-2010, 22:57
change bonnets or take a grinder to the underside of the bonnet, and cut some of the frame out. has been done before one sleepers.