PDA

View Full Version : Why wont the temp display go out??



glyn211269
28-05-2010, 23:29
Here we go again. Finally get the misfire and cutting out sorted and within an hour 0041 comes up with another problem!

The outside temp display packed up a while back so I took the dash out and replaced both illumination bulbs which had died. Hoorah, a nice bright display.....only when you switch off and lock up the backlights remain illuminated and ultimately lead to a flat battery.

Any clues anyone? What have I done wrong??

I'm determined to get it fault free for the FCS....

MatBrown
29-05-2010, 08:04
Are all the wires in the plug correct?


Mat.

glyn211269
29-05-2010, 12:12
I'll pull the cluster out again and have a look next weekend.

Also found that the speedo needle has got the wobbles between 20-30mph since then too. It was fine before tho. I thought that was usually due to wear in the cable but seems a coincidence that its started since I disconnected it when pulling the instrument cluster out....