PDA

View Full Version : Everything under £20.....



_PAUL_
27-05-2010, 18:24
Right im having a clear out of parts to get the last bit of spending money before i go on holiday
I do have pictures but didnt want to fill the thread with loads so message me if you want some.
Postage can be arranged or collection from Rochford in Essex or can bring to FCS.

PH1 oil dials £15
PH1 heater dials £5
PH1 clock £7
PH1 main dials £20
PH1 door mirrors £10(Each)
Original rubber clio floor mats £20
Front arch liners(Inc bumper part) £20
Plastic boot panel £5
ECU cover £5
Spark plug cover with sticker £15
Spark plug cover(Needs new sticker) £8
Radiator surround £10
Rocker cover £15
Inlet manifold £15
Metal fuel rail £5
Seat belt height adjusters £5
Dogbone mount £10
PH1 rear lights £10
Headlights £20
Radiator + Fan £20
Alternator £20
Starter motor £20
Coil pack £10
Front hubs(Pair) £20
Front calipers(Pair)£20
Steering colum(Been welded and has no play) £20
Map sensor £5
Rear brake disc covers £5
ISCV £15
Front shocks with Apex lowering springs(Collection only) £20
Standard shocks and springs(Collection only) £20
Steering wheel surround £5
Wiper stalk £8
Boot struts £5
Slam panel £10
Gear linkage £10
Door and window rubber seals £5(Each)
449 rear bumper(collection only) £10
449 tailgate(Colletion only) £20
449 passenger arch £20
449 drivers arch(Has a small crack) £10
Black passenger door(Will need 1 door pin drilling out) £20
432 drivers arch £20
432 passenger arch £20
432 tailgate(collection only) £20
432 rear bumper(collection only) £20
Downpipe and lambda £20
Undercar heatshield £5
PH1 steering wheel £20
Throttle cable £5


And a couple not under £20 :P :

PH2 interior £50
Catalitic converter £40
Brand new cat converter still in packaging £60
JB3 gearbox £40

Will update if i find anything else

I will be on the Clio16Valver stand.
I have a black valver with white williams wheels.....N171 OYT is the reg.
Come and find me or give me a call on 07929872915 on the day

talkingfish
27-05-2010, 18:28
Hiya - I'll take the original rubber mats off you if that's OK? Cheers. Can sort payment at FCS?

steve d
27-05-2010, 18:31
Do you have a oil temp/level sender if so how much would you want for it.

LEIGH-ANNE
27-05-2010, 18:46
Hiya - I'll take the original rubber mats off you if that's OK? Cheers. Can sort payment at FCS?


BUGGER YOU!

_PAUL_
27-05-2010, 18:54
Hiya - I'll take the original rubber mats off you if that's OK? Cheers. Can sort payment at FCS?

Yea thats fine mate.
I will be on the Clio16Valver stand.
I have a black valver with white williams wheels.....N171 OYT is the reg.
Come and find me or give me a call on 07929872915 on the day :)

_PAUL_
27-05-2010, 18:54
Do you have a oil temp/level sender if so how much would you want for it.

I think i do mate.....Its the long stick isnt it ?

MatBrown
27-05-2010, 18:59
Don't forget me.


Mat.

Tommo
27-05-2010, 19:53
Does the slam panel have any rust on it? If not I'll have it, pay you at FCS?

_PAUL_
27-05-2010, 20:25
Havent forgot you Mat :wink:
Ive got 3 used cats and 1 new one :P

Dont think the slam panel does mate.....I have 2 so will bring them both along :)

Tommo
27-05-2010, 20:27
Thanks mate

_PAUL_
27-05-2010, 20:29
No worries.
My number and car details are up there ^^ :)

jamiecrookston83
27-05-2010, 21:37
I'll take the front wheel arch liners from you mate if thats ok. Can you post to Edinburgh?

Cheers

Jamie

_PAUL_
27-05-2010, 21:41
Erm i should have put collection only really as they are quite large and may end up getting damaged.
I can try packaging them up but not sure how much postage will be.
You not going FCS ? Or anyone local to you thats going that could collect them ?

LEIGH-ANNE
27-05-2010, 21:43
I beleive dimma comes from edinburgh and hes going to FCS

jamiecrookston83
27-05-2010, 21:55
Im not going this yr mate :cry: Its alot to ask for postage. If its to much hassle don't worry. I'm not sure if anyone else on here is from Edinburgh. I've not seen anyone unless i'm being blind

_PAUL_
27-05-2010, 22:04
I will see if i have a box laying around that they will fit in then it shouldnt be to bad to post.
Just a pain wrapping things up without a box especially if they are flexible :lol:
Will drop you a PM and let you know mate.

These parts are sold pending collection at FCS:
Original rubber clio floor mats £20
Slam panel £10
JB3 gearbox £40

jamiecrookston83
27-05-2010, 22:10
Thanks buddy I appreciate it

steve d
27-05-2010, 22:32
Do you have a oil temp/level sender if so how much would you want for it.

I think i do mate.....Its the long stick isnt it ?

I think that is the one, how much do you what for it.

_PAUL_
27-05-2010, 22:54
Sent you a PM mate.

talkingfish
28-05-2010, 13:55
Hiya - I'll take the original rubber mats off you if that's OK? Cheers. Can sort payment at FCS?

Yea thats fine mate.
I will be on the Clio16Valver stand.
I have a black valver with white williams wheels.....N171 OYT is the reg.
Come and find me or give me a call on 07929872915 on the day :)

No worries. I'll be on the Top25 stand with my Williams - we'll catch up at some point on the day! Nice One!

_PAUL_
02-06-2010, 23:28
BUMP.....

These parts are sold/provisionally sold:
Original rubber clio floor mats £20
Slam panel £10
449 passenger arch £20
Catalitic converter £40(Plus 2 more)
JB3 gearbox £40

shag
02-06-2010, 23:51
is the mount poly mate r standard

_PAUL_
03-06-2010, 00:59
Standard.....Wouldnt be selling a poly bushed one for £10 :lol:

shag
03-06-2010, 01:02
1 went lst week for 12 quid so y not gotta try

_PAUL_
07-06-2010, 00:09
BUMP....

Can take parts with me this weekend to FCS but will need to know in advance so i can get it all loaded in the car.

_PAUL_
08-06-2010, 23:38
BUMPPPP

_PAUL_
29-06-2010, 13:29
Anyone.....