jenvey itbs 45mm + carbon fibre trumpets + tps

[walters300]

as title 45mm jenvey throttle bodies with carbon fibre trumpets and throttle position sensor, no manifold. worth new around 200 for the trumpets and 800 for the itbs. looking for £795 ono inc delivery. will get pics up on the weekend. paypal only for payment :wink:

[Evogone]

I have an ITB manifold that would work with these if thats a stumbling block to buying the above...

[walters300]

:wink: top man... thank you,someone also has one hell of an engine to go with these on clio16valver, high comp all the good bits, if i wasnt stuck with my turbo setup i would be buying, :?

[phantome46]

any pictures?

[walters300]

sorry mate there sold pending payment on the weekend, if it falls through i will get in touch

[walters300]

Back forsale ... £750 delivered.. first come first served payment via paypal only

[walters300]

also has fuel rail i forgot to mention....

[zmaster2k]

omg... i need thses in my life...

good luck with sale!1

[walters300]

:( me too! hols and misses birthday coming up :?

[walters300]

now £695 delivered with payment through paypal, many have asked about credit card payment. I beleive if you set it as your primary payment source on paypal it can be used. bargain for someone here lads..

[phantome46]

I am a complete novice here, what else would be needed for a complete working set up on the williams?

[schakal]

same question here ^^^
will they fit a f7p/r ?

[Geeky]

Interested in these, waiting for car quote after work today to see if I'll still have the funds after my rot is sorted.

[Geeky]

I'd also like to know what else is required.

I think you'll need:
- Omex or similar ECU (I think these are around £400 but that's a massive guess)
- Filter and air box for t'trumpets
Loom?
- more sensetive sensors (optional I think)

[Geeky]

quote's gonna be tommorow now. In for MOT and to fix rot on rear underside. failled on rot, plus mcpherson strut needs replacing plus emmisions and a knackered rear tyre. only the rot i'm concerned about.

[davidbuttigieg]

Mainly you'd need ;

manifold .. check if Evogone still has his for sale
TPS
stand alone management system
wiring loom
megane (or 172 ?!) flywheel for ECU trigger patterns
short rad & fan
air temp sensor
brake servo fitting

[16v_paddy]

Evogone doesn't have the manifold anymore

[walters300]

you will still need.
1. inlet manifold. (£200)
2. omex ecu and loom (or someone to have a go tuning the standard ecu.) :D (£6-700 with loom i beleive.)
3. shortened rad (£?)
4. injectors. 182 ones will do i have been told (£?)
5.someone to map it. about another £500 i believe.


and if you want big power it will cost loads on top of that, not really helping my sale here but you need to know whats ahead before you start :wink:

[16v_paddy]

Can use megane F7R injectors, keep an eye out for them on ebay, I recently got a set with the fuel rail for £20 :wink:

[walters300]

top man paddy for the good advice, even though you should be running these down to get rid of the ones you have :P thanks bud :wink: