View Full Version : jenvey itbs 45mm + carbon fibre trumpets + tps
walters300
27-05-2010, 12:57
as title 45mm jenvey throttle bodies with carbon fibre trumpets and throttle position sensor, no manifold. worth new around 200 for the trumpets and 800 for the itbs. looking for £795 ono inc delivery. will get pics up on the weekend. paypal only for payment :wink:
I have an ITB manifold that would work with these if thats a stumbling block to buying the above...
walters300
27-05-2010, 13:23
:wink: top man... thank you,someone also has one hell of an engine to go with these on clio16valver, high comp all the good bits, if i wasnt stuck with my turbo setup i would be buying, :?
phantome46
09-06-2010, 18:27
any pictures?
walters300
09-06-2010, 19:28
sorry mate there sold pending payment on the weekend, if it falls through i will get in touch
walters300
17-07-2010, 16:29
Back forsale ... £750 delivered.. first come first served payment via paypal only
walters300
17-07-2010, 16:35
also has fuel rail i forgot to mention....
zmaster2k
17-07-2010, 16:37
omg... i need thses in my life...
good luck with sale!1
walters300
17-07-2010, 16:39
:( me too! hols and misses birthday coming up :?
walters300
24-08-2010, 12:43
now £695 delivered with payment through paypal, many have asked about credit card payment. I beleive if you set it as your primary payment source on paypal it can be used. bargain for someone here lads..
phantome46
24-08-2010, 14:53
I am a complete novice here, what else would be needed for a complete working set up on the williams?
same question here ^^^
will they fit a f7p/r ?
Interested in these, waiting for car quote after work today to see if I'll still have the funds after my rot is sorted.
I'd also like to know what else is required.
I think you'll need:
- Omex or similar ECU (I think these are around £400 but that's a massive guess)
- Filter and air box for t'trumpets
Loom?
- more sensetive sensors (optional I think)
quote's gonna be tommorow now. In for MOT and to fix rot on rear underside. failled on rot, plus mcpherson strut needs replacing plus emmisions and a knackered rear tyre. only the rot i'm concerned about.
davidbuttigieg
24-08-2010, 18:16
Mainly you'd need ;
manifold .. check if Evogone still has his for sale
TPS
stand alone management system
wiring loom
megane (or 172 ?!) flywheel for ECU trigger patterns
short rad & fan
air temp sensor
brake servo fitting
16v_paddy
24-08-2010, 19:57
Evogone doesn't have the manifold anymore
walters300
25-08-2010, 13:12
you will still need.
1. inlet manifold. (£200)
2. omex ecu and loom (or someone to have a go tuning the standard ecu.) :D (£6-700 with loom i beleive.)
3. shortened rad (£?)
4. injectors. 182 ones will do i have been told (£?)
5.someone to map it. about another £500 i believe.
and if you want big power it will cost loads on top of that, not really helping my sale here but you need to know whats ahead before you start :wink:
16v_paddy
25-08-2010, 19:58
Can use megane F7R injectors, keep an eye out for them on ebay, I recently got a set with the fuel rail for £20 :wink:
walters300
26-08-2010, 12:06
top man paddy for the good advice, even though you should be running these down to get rid of the ones you have :P thanks bud :wink:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.