VIPERONE
25-07-2005, 14:00
Both the Williams and 1.8 16v utilise the same racks.. only difference is the tie rods.
there are 2 marks of rack.. the first is on the williams the 2nd on the valver.. the latter being the newer.
the racks have a ratio cast in to the assembly. both are same.
lock to lock 3 1/4 turns.
:-)
The new style rack will require valver track rod ends. The rod ends will need to be unwound 17mm extra per side, if fitting ona williams
"1001 Williams Facts by J R Northy"
there are 2 marks of rack.. the first is on the williams the 2nd on the valver.. the latter being the newer.
the racks have a ratio cast in to the assembly. both are same.
lock to lock 3 1/4 turns.
:-)
The new style rack will require valver track rod ends. The rod ends will need to be unwound 17mm extra per side, if fitting ona williams
"1001 Williams Facts by J R Northy"