PDA

View Full Version : My new toys ;o)


smokey
24-07-2005, 01:47
Shall be here Tuesday and fitted wednesday :D

How easy is it to set the camber up as he's hrowing in a set of ktech camber correcting bolts which are needed for the valver apparently


http://images.fotopic.net/yamp7k.jpg

£210 all in
2 live
24-07-2005, 11:03
just be careful mate.first bump u come to theyl put 2 dents in the underside of the bonnet
1fast6
24-07-2005, 12:01
^^ Seriously? Bit of a design flaw....
smokey
25-07-2005, 01:02
:shock:

can anything be done to stop this?? Can i grind 2mm ish off the top and still be able to adjust the damping?
dannyt
25-07-2005, 07:21
Looking good mate, but like 2live said, be careful as Martins old wiliams got some good ones in that!
Andy
25-07-2005, 07:21
dents are noticable and look horrible :cry:
J o n
25-07-2005, 08:01
no you cant cut the tops off as they need to be left so you can adjust them... they also dented Mehdi's old bonnet :(
2 live
25-07-2005, 12:36
and bruns too i blieve.......bad design these shocks mate which causes the denting of the bonnet........spend a bit more and go for the avo set up , or leda if ur flush lol........can recommend em and they dont causes any dents..well avos dont for def
smokey
25-07-2005, 19:50
They are brand new, so if they dent my bonnet because of a design flaw then GAZ will have to pick up the bill as there 'Not fit for purpose'
They are advertised as for the 1.8 16v and thats what i have got.
So surely it is there problem to fix my car if damaged is caused by one of there products fitted correctly.

I have bought and pait for them anyway. Wasnt even going to bother touvhing the setup, may of changed the springs but thats it as im only keeping it a cpl of months. These were such a bargain thou i had to buy them :roll:

Anyway, i have been PM'd by a member here who told me of a fix for this, i will find out more tomorrow

Just gotta order me GSD3's in 15" now and then speak to Andy about SMT :D

Smokey