PDA

View Full Version : My clio 16V


fani
19-03-2010, 13:46
just a few pictures with my valver after a good clean.
katbloke
19-03-2010, 13:49
Shame the ngine bay looks so rough, doesnt match the exterior at all, if you were a sandwich toaster that would be an awesome number plate
fani
19-03-2010, 13:55
yes i know. in spring i'll begin the work on the engine, and i hope it will match the exterior. the engine will have williams pistons with 1.9 diesel crank.
Coops
19-03-2010, 14:43
i'd get your steering wheel looked at mate, appears to be on the wrong side of the car :wink:
fani
19-03-2010, 15:20
yeah ! you're damn right ! :D
manel16v
19-03-2010, 15:34
Hi,

What rims do you have?? I would put the original pieces of the valver! :wink:
northy
19-03-2010, 16:09
love the plate EVL !
djtlane
19-03-2010, 21:41
wonderful fani from any angle........................ops forgot the comma
fani
19-03-2010, 22:24
Hi,

What rims do you have?? I would put the original pieces of the valver! :wink:
the rims are speedline, 15' x 7J.
manel16v
20-03-2010, 10:50
Hi,

What rims do you have?? I would put the original pieces of the valver! :wink:
the rims are speedline, 15' x 7J.

but, the rims aren't the speedline gr.a, no?

cheers
fani
20-03-2010, 22:02
yes, those are the exact rims.
fani
15-07-2010, 07:33
i dismantled my engine - now it has williams pistons, another crankshaft, etc. and i can't remember where these part was from, and what is the position of the part. thanks in advance for the help.
zmaster2k
15-07-2010, 09:05
inlet to mapsensor?
schakal
15-07-2010, 09:24
thats a knock sensor by the looks .either screws into the head or
block right under it .

the metal pipe bolts on to the head on dizzy side ,its for the breather system.

izzz niiceeee http://www.renault9-11club.nl/phpBB2/images/smiles/icon_thumbs.gif
fani
29-07-2010, 12:24
a picture that's worth a 100 words.