View Full Version : mocal oil cooler thermostat ?
anyone know at what temperature it opens ??
i assume ,to be able to fill the engine with oil i need
to warm up to that temp to allow the oil rad to fill then
top up again ?? :P
TALK TO ME !!
Justin..
10-03-2010, 20:14
80 degrees celcius I think
i see ur getting it fitted ;)
i see ur getting it fitted ;)
ayee butt .
fitted today , it was missing the rubber seal for the sandwich
plate . couple quid from ebay :P
Check before installation whether the thermostat works perfectly or not. A friend of mine installed the sandwich plate but the thermostat was always opened... so the (cold) oil first went into the cooler. The engine could not become warm and had a bad noise on high rpm and serious power loss... :(
i see ur getting it fitted ;)
ayee butt .
fitted today , it was missing the rubber seal for the sandwich
plate . couple quid from ebay :P
was it :shock: sorry mate didnt think about a seal for it
Check before installation whether the thermostat works perfectly or not. A friend of mine installed the sandwich plate but the thermostat was always opened... so the (cold) oil first went into the cooler. The engine could not become warm and had a bad noise on high rpm and serious power loss... :(
how do you check that ??
cooper , no probs mate .
the seal was cheap enough :D
no matter, it's fitted :D
dont need to heat it, just run engine with new oil, then top up as level drops, be reet :wink:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.