View Full Version : Bleeding Calipers...
1995clio16v
28-02-2010, 13:42
Just in the middle of doing it.
Depressed the pedal etc.
And its just trickling out, is this right? Gonna be here all day.
I assumed in would have poured out....?
you need to pump the pedal then hold it down...
then open the nipple let the air/fluid out and shut the nipple
then pump the pedal five times and hold down again...
then open the nipple let the air/fluid out and shut the nipple..
and repeat until you have a good pedal / have bleed all four calipers
best to do it with a one way valve attachement
on the nipple tbqfh with you.
Start at the N/s/r, as it is the furthest away. work back towards the closest to the master cylinder.
Get a mate to pump and hold the pedals while you open the bleed nipple and bleed off through a pipe into a bottle or jar. Make sure you pump the pedal slowly or you can damage the master cylinder.
1995clio16v
28-02-2010, 16:53
Yeah, cheers guys.
Well Ive royaly ****ed it up as I tried doing it on my own. Still a bit left in. Will try and remove the rest when my head is a bit straighter!
Only wanted to get the fluid out so I can remove the calipers, hoses and lines from the engine bay.
If you wanna do that just take the hoses off and leave to drain out into a container, oh and take the cover off the brake fluid res
1995clio16v
28-02-2010, 17:27
If you wanna do that just take the hoses off and leave to drain out into a container, oh and take the cover off the brake fluid res
Probably should have just done that in the first place rather than f-ing around with bleeding!
Im not the sharpest tool in the box at times! :o
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.