JamesRT
07-02-2010, 17:18
Hi there, havent posted on here before but always been a lurker :lol: Got a few bits ive gathered over the years that are no use to me.
4th Mount, complete but dont have bolts that attach it to the block. A very worthwhile addition to your clio. - £30 Posted.
http://i818.photobucket.com/albums/zz103/lcservices/4thmount.jpg
R5 Rear Mount, used to completely replace the dogbone mount on a clio, this is a superiour mount. However you can only use it with adaptions to your steering setup, i.e if you use Manual PAS you will be fine, standard clio racks foul this mount. In very good condition - £35 Posted.
http://i818.photobucket.com/albums/zz103/lcservices/r5mount.jpg
Oil pump for F7P/F7R, was used in an engine i had. It was cleaned and inspected a few years back, 2 small M5 washers have been added to the relief valve (can be removed easy), provided 4bar hot oil pressure all day long, this is a good pump. - £23 Posted.
http://i818.photobucket.com/albums/zz103/lcservices/oilpump.jpg
Williams manifold in good condition, its missing the studs as they both sheared, the thread on the manifold are A1 though so ready for new studs (cheap from ren). - £35 Posted.
http://i818.photobucket.com/albums/zz103/lcservices/manifold.jpg
Williams F7R Crank, In VGC, uses standard size bearings, so has never been reground. Journals are in good shape, put this straight into your seized bottom end :) - £40 Collected.
http://i818.photobucket.com/albums/zz103/lcservices/williamscrank1.jpg
http://i818.photobucket.com/albums/zz103/lcservices/williamscrank2.jpg
Thanks for looking, James.
4th Mount, complete but dont have bolts that attach it to the block. A very worthwhile addition to your clio. - £30 Posted.
http://i818.photobucket.com/albums/zz103/lcservices/4thmount.jpg
R5 Rear Mount, used to completely replace the dogbone mount on a clio, this is a superiour mount. However you can only use it with adaptions to your steering setup, i.e if you use Manual PAS you will be fine, standard clio racks foul this mount. In very good condition - £35 Posted.
http://i818.photobucket.com/albums/zz103/lcservices/r5mount.jpg
Oil pump for F7P/F7R, was used in an engine i had. It was cleaned and inspected a few years back, 2 small M5 washers have been added to the relief valve (can be removed easy), provided 4bar hot oil pressure all day long, this is a good pump. - £23 Posted.
http://i818.photobucket.com/albums/zz103/lcservices/oilpump.jpg
Williams manifold in good condition, its missing the studs as they both sheared, the thread on the manifold are A1 though so ready for new studs (cheap from ren). - £35 Posted.
http://i818.photobucket.com/albums/zz103/lcservices/manifold.jpg
Williams F7R Crank, In VGC, uses standard size bearings, so has never been reground. Journals are in good shape, put this straight into your seized bottom end :) - £40 Collected.
http://i818.photobucket.com/albums/zz103/lcservices/williamscrank1.jpg
http://i818.photobucket.com/albums/zz103/lcservices/williamscrank2.jpg
Thanks for looking, James.