View Full Version : Torsion Bar, M8 or M10
freebone16v
01-02-2010, 15:24
need to know before i buy
anybody?
M10 x 1.5 thread ..in the end of the bar..need 10.9 or 12.9 bolts and nuts..
freebone16v
01-02-2010, 22:59
thank you sir
need a peice of M10 threaded bar then...doh
any advice for doing it???
zmaster2k
01-02-2010, 23:41
what you trying to do matey? lower?
plus gas..10.9 threaded bolt nut and large socket...
tension the bolt up..maybe shock with a large hammer if not moving
jack the axle to required level rotate bars until they slide back in...
zmaster2k
01-02-2010, 23:49
yup only failed on me once.
used high tensile bolt and impact gun at tye fitting place! piece of pee!
freebone16v
02-02-2010, 12:37
what you trying to do matey? lower?
higher it mate, will be up for sale shortly
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.