cheapest 4th engine mount for williams? [Archive]

View Full Version : cheapest 4th engine mount for williams?

24-01-2010, 21:10

whats the cheapest way to go about buying and fitting forth engine mount the one that attaches to the subfame, is there any inside knowledge??? any advice really welcome..

Wobba

24-01-2010, 23:36

whats the cheapest way to go about buying and fitting forth engine mount the one that attaches to the subfame, is there any inside knowledge??? any advice really welcome..

Go to a scrapyard, find a Mk1 Megane take bolts off and get the mount, keep the bolts. Mine cost about £7.

robi1000

25-01-2010, 00:19

mk1 F7R megane?

Justin..

25-01-2010, 00:53

Any megane

Or R19 if you find one

Wobba

25-01-2010, 01:18

Any megane

Or R19 if you find one

Almost any Meggy. Just look around a scrappy.

25-01-2010, 08:33

brilliant ta very much i knew someone on here would have the answers

busterhymes

25-01-2010, 11:04

think i got told the same mount is used on volvo which models im uncertain the rubber part of this mount can be had from GSF for about £15 all the fasteners are available from any good nuts and bolts stockist :wink:

vkosho

26-01-2010, 01:36

i still need to get on this too. Has anyone got a picture of the 4th mount showing where it bolts on?

Cheers

busterhymes

26-01-2010, 09:51

i still need to get on this too. Has anyone got a picture of the 4th mount showing where it bolts on?

Cheers

you looked here

http://www.williamsclio.co.uk/forum/viewtopic.php?t=15495

its all fairly clear when you actually have a look basically the plate bolts to the front of the gearbox above the passenger side member of the subframe and the rubber mount stud drop thro a hole thro subframe and the other stud goes thro the bracket, in a nut shell with a bit of messing and swearing :wink: