High spec F7P 1.8 16v Turbo engine & parts for sale

[cliokiz]

Bought from Bendee about 12 months ago - has sat in my garage ever since.

Here's the spec lifted from the original for sale advert:

1.8 16v F7P turbo converted engine
Block rebored 0.5 over size
Block modded for oil return
Block chemically cleaned and painted black
New wossnor over size low comp turbo forged pistons with jap spec rings
New wossnor forged h section rods
New APR race spec rod bolts
New big and small end bearings
Autosprint race spec lightened & balanced bottom end
Autosprint lightened flywheel
New spec stage 3+carbon clutch
Refurbed oil pump
New oil seals and gaskets
1.9mm turbo spec head gasket
New head bolts
Autosprint race spec ported & polished head
Autosprint 265degree camshafts
Re-shaped combustion chambers
Inlet/exhaust ports inlarged as much as possible
Williams valves
New seats/guides/re faced
Polished & enlarged inlet manifold
Modded throttle body (knife edged)
BB turbo large manifold polished internally - modded to fit T3 turbo
Cosworth T3 hybrid turbo
One off turbo back down pipe
BB turbo oil feed
502cc dark grey injectors
Charge cooler
Oil catch tank
4" bore side exit exhaust with slash cut tip
RAMAIR scuttle induction kit
Gotech MFI Pro standalone engine management with customised loom
Cosworth coil pack & 8mm performance leads
Uprated fuel pump

Loads of other bits too which will be included.

Here's some photos of the parts from when i collected them:

http://i62.photobucket.com/albums/h120/cliokiz/Turbo%2007-Aug-2008/SUC30001.jpg

http://i62.photobucket.com/albums/h120/cliokiz/Turbo%2007-Aug-2008/SUC30002.jpg

http://i62.photobucket.com/albums/h120/cliokiz/Turbo%2007-Aug-2008/SUC30003.jpg

http://i62.photobucket.com/albums/h120/cliokiz/Turbo%2007-Aug-2008/SUC30004.jpg

http://i62.photobucket.com/albums/h120/cliokiz/Turbo%2007-Aug-2008/SUC30005.jpg

http://i62.photobucket.com/albums/h120/cliokiz/Turbo%2007-Aug-2008/SUC30006.jpg

http://i62.photobucket.com/albums/h120/cliokiz/Turbo%2007-Aug-2008/SUC30007.jpg

http://i62.photobucket.com/albums/h120/cliokiz/Turbo%2007-Aug-2008/SUC30008.jpg

http://i62.photobucket.com/albums/h120/cliokiz/Turbo%2007-Aug-2008/SUC30009.jpg

http://i62.photobucket.com/albums/h120/cliokiz/Turbo%2007-Aug-2008/SUC30010.jpg

http://i62.photobucket.com/albums/h120/cliokiz/Turbo%2007-Aug-2008/SUC30011.jpg

http://i62.photobucket.com/albums/h120/cliokiz/Turbo%2007-Aug-2008/SUC30012.jpg

http://i62.photobucket.com/albums/h120/cliokiz/Turbo%2007-Aug-2008/SUC30013.jpg

http://i62.photobucket.com/albums/h120/cliokiz/Turbo%2007-Aug-2008/SUC30014.jpg

http://i62.photobucket.com/albums/h120/cliokiz/Turbo%2007-Aug-2008/SUC30015.jpg

http://i62.photobucket.com/albums/h120/cliokiz/Turbo%2007-Aug-2008/SUC30016.jpg

http://i62.photobucket.com/albums/h120/cliokiz/Turbo%2007-Aug-2008/SUC30017.jpg

http://i62.photobucket.com/albums/h120/cliokiz/Turbo%2007-Aug-2008/SUC30019.jpg

Alternator isn't included.

Basically, you have everything needed to drop this lump into your car. The engine has never been run.

Paid £2,100 for this last year, not overly fussy about selling as i REALLY want to put this in my valver but i'm moving out soon and really REALLY need the cash. Would take £2,000 for the lot.

The engine was built in a 5 but never run as the previous owner lost his job and sold everything. Here's a picture of how it looked:

http://i62.photobucket.com/albums/h120/cliokiz/Turbo%2007-Aug-2008/DSC00042.jpg

http://i62.photobucket.com/albums/h120/cliokiz/Turbo%2007-Aug-2008/DSC00045.jpg

[cliokiz]

Provisionally sold, pending collection.

[fani]

with these parts, what's the approximative power that can be achieved ? thanks.

[bendee]

i was told to expect 300ish when i bought it.