View Full Version : Heater pipe diagram
I reckon that when the new dash was fitted in my car that the heater pipes/tubes werent rigged up properly.When i turn the heater on it works fine out of the middle 2 vents but nothing comes out of the ones next to the doors and only a small bit from the one next to the screen glass.
Has anyone got the dialogies pic of the correct set up of the pipes so that i can have a look myself and hopefully be able to fix without having to remove the whole dash please?
thanks
I can sort you out when I get home from work Snowy.
It's a common problem!
my new best friend 8)
cheers mate :wink:
Can't find a very good diaologys pic showing the pipework, but the problem wont be the pipes it will be the cables from the switch on the dashboard controls for air distribution:
http://i174.photobucket.com/albums/w102/barneywobba/Heating%20system/cables.jpg
http://i174.photobucket.com/albums/w102/barneywobba/Heating%20system/cables2.jpg
Simply, the cables get loose/broken etc and don't open the vents properly on the air distribution unit.
I've uploaded a PDF here which goes into detail about the heater system on the Mk1 Clio:
Download Heater controls.pdf from FileFactory.com (http://www.filefactory.com/file/a155e33/n/Heater_controls.pdf)
Downloaded cheers mate :D :wink:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.