PDA

View Full Version : What plug leads are needed for itb (coil) setup ?


Evogone
28-12-2009, 20:32
As above is has a KMS coilpack...? little pins.

Will megane ones work ?
Justin..
28-12-2009, 20:36
Doesnt the megane have pencil coils? I doubt they'd work. What about 172 ones?
sideways danny
29-12-2009, 02:50
4 pin mini-timer plug? if so, that's the same as the megane coilpack. get plugs from RS or maplins for pennys
Evogone
29-12-2009, 08:20
Its a KMS coil pack and uses the latest Ford type coil connector which are small pins and large diameter rubber boot.

Any pics of a megane coil pack ? with the plug lead off.
Laine_16v
01-01-2010, 15:04
What head are you using? if it is, just ditch the KMS one and use a meganne coil pack.
Evogone
01-01-2010, 20:50
What head are you using? if it is, just ditch the KMS one and use a meganne coil pack.

Its a megane head with KMS coilpack. Do std coilpacks fir std williams dizzy leads ? or do i then need megane leads ?
Laine_16v
02-01-2010, 11:01
What head are you using? if it is, just ditch the KMS one and use a meganne coil pack.

Its a megane head with KMS coilpack. Do std coilpacks fir std williams dizzy leads ? or do i then need megane leads ?

Eh?! YOu plonk on a meganne coilpack and thats it! you adapt the wiring to fit that (pieces of piss!).

There are no leads on meggy coil packs the whole thing bolts to the top of the rocker cover.

No need for dizzy caps?
Evogone
02-01-2010, 11:32
What head are you using? if it is, just ditch the KMS one and use a meganne coil pack.

Its a megane head with KMS coilpack. Do std coilpacks fir std williams dizzy leads ? or do i then need megane leads ?

Eh?! YOu plonk on a meganne coilpack and thats it! you adapt the wiring to fit that (pieces of piss!).

There are no leads on meggy coil packs the whole thing bolts to the top of the rocker cover.

No need for dizzy caps?

Dufuss i mean the HT lead connects / ends are they the same as the std dizzy connection type on the coil pack....so i can use std leads of do i need megane ones..#?
Laine_16v
02-01-2010, 11:39
Dufuss?!

WHERE ARE THE LEADS ON A MEGGY COIL PACK!!!

http://img220.imageshack.us/img220/5426/valeof7rignitioncoilqc4.jpg
Evogone
02-01-2010, 13:19
Are its a pencil coil type...... though it was the same set up as the KMS when you said just swap it... :oops:

Magnacor are making me to Ht leads Williams one end and 4mm Ford pin (KMS type) other end.
Justin..
02-01-2010, 14:07
Didnt I say this on post the very FIRST reply !! :roll: :roll: :roll: :roll: :roll: :roll:
Evogone
02-01-2010, 15:07
Didnt I say this on post the very FIRST reply !! :roll: :roll: :roll: :roll: :roll: :roll:

How much are these and will i have to get a connector plug etc ?
Laine_16v
03-01-2010, 22:31
Get a 2nd hand one.

I have a loom connector if your after one.
Evogone
07-01-2010, 15:05
Will 172 pulg leads work ? Anyone got pics of these leads compared to Williams ones ?

Need to see if the plug end has the depth and the coil pack end is for the small pin type (smaller than the a std dizzy connection.
sideways danny
07-01-2010, 15:45
172 leads will work with a 172 coilpack. if it's a ford coilpack you'll need to find some ford leads that fit
Evogone
07-01-2010, 15:51
172 leads will work with a 172 coilpack. if it's a ford coilpack you'll need to find some ford leads that fit

Valeo, Bosch and Sagem ones are the same fitment im told..