PDA

View Full Version : Powder coated Cam covers & engine mounts


Evogone
11-12-2009, 17:35
As demand is increasing i have had another batch of cam covers and some engine mounts done.

Cam & Pully covers in Black or Primer Grey (looks cool) - 75
Cam & Pully covers in Carbon effect - 125
Engine mount 2pc set in Silver - 65

These are off the shelf items now but can do near any other colors on an exchange basis. pm for querries wheels and other stuff done too.

http://i299.photobucket.com/albums/mm290/Evogone/P1020406.jpg
http://i299.photobucket.com/albums/mm290/Evogone/P1020404.jpg
http://i299.photobucket.com/albums/mm290/Evogone/P1020293.jpg
Evogone
15-12-2009, 10:18
Bump
Wobba
15-12-2009, 15:07
Still keen to have a look at carbon ones mate, but will have to wait till after xmas probably!
Justin..
15-12-2009, 19:18
The engine mount shown isn't for a Williams?
Jamie.
15-12-2009, 19:38
CF looks really good.
Evogone
16-12-2009, 00:54
The engine mount shown isn't for a Williams?

They are 16v / williams, no difference...
Justin..
16-12-2009, 19:03
Ok, The engine mount shown in the picture on the left isn't for 16v/Williams
Clio_GTT
16-12-2009, 19:42
Ok, The engine mount shown in the picture on the left isn't for 16v/Williams

It is
Clio_GTT
16-12-2009, 19:43
http://i240.photobucket.com/albums/ff211/talkingfish/PA170490.jpg

You can see it on the left here
MatBrown
16-12-2009, 19:46
Thats not the same.
Shouldn't have the extra bit on the left or the hole right through the middle.


Mat.
Justin..
16-12-2009, 19:54
Its either a 1.2/1.4 or RSi mount by the looks
Clio_GTT
16-12-2009, 19:57
It off a 19?
schakal
16-12-2009, 19:59
It off a 19?

19 s dont have top mounts
Evogone
16-12-2009, 20:26
Thats not the same.
Shouldn't have the extra bit on the left or the hole right through the middle.


Mat.

You may well be right, i asumed 16v as they are just what a customer has sent and took pics before sending back.


Any buyers... roll up roll up :wink: