PDA

View Full Version : fao matt brown (jc5)


VIPERONE
18-07-2005, 07:47
http://i4.photobucket.com/albums/y109/gunnergibson/jc55.jpg megane ^^^

http://i4.photobucket.com/albums/y109/gunnergibson/jc33.jpg valver

the point of the tirange hole, is in exact location as the valver one.. so naturally mount that one first then make a braket to fit other holes....

ratios are same as willy bar 1st + 3rd.
Mark_Ritchspeed
18-07-2005, 21:11
Gibbo, you tightarse, get yourself down to Renault and get the proper mount. Its less than £20 brand new. :roll:
VIPERONE
19-07-2005, 01:21
The megane bracket when fixed leaves the box sitting incorrectly :-) .. and also:

http://www.egtonbanksfarm.agriplus.net/jpeg/ylogorevt.jpg
MatBrown
19-07-2005, 01:33
Cheers mate,

Just waiting to hear back from him.

What is the problem with the Renault mount?



Mat.
VIPERONE
19-07-2005, 01:46
the angle of the mount spike is not correct.
Mark_Ritchspeed
19-07-2005, 08:56
Are you sure, because the angle is perfect on mine, but I needed to space the main bolt higher to keep the engine level.

Whose got the dialogy thingys, to see if the Megane one is the same as the Kangoo one I've got?

I will get a piccy of mine this morning and also get the part number off it.
2 live
19-07-2005, 09:14
the megane one is a mile off mate..the bit that bolts up under the batt tray is at the completely wrong angle
Mark_Ritchspeed
19-07-2005, 09:32
I will get pics of the Kangoo one and some measurements as well, as it may fit the Megane box.
MatBrown
19-07-2005, 09:38
Cheers.



Mat.