PDA

View Full Version : fse, how to plumb in?


midge
08-09-2009, 17:16
i got this without instructions! you can see i have numbered it help appreciated :)

http://i2.photobucket.com/albums/y48/52egdim/mondeo/fsenumbered.jpg
Justin..
08-09-2009, 18:18
1 connects to 2

3 connects to the return line which is on the top of the fuel rail as its rendered useless with this, some people block if off, but imo there's no point cos it goes no where.

4 connects to the vac line that use to feed the OE regulator


Get a pressure gauge too. About £20
midge
08-09-2009, 18:37
what am i ment to do with 3? how do i connect it to the return line?

thansk for your help btw!

where would the gauge go?
Justin..
08-09-2009, 18:39
you'll need a fuel line connector and some hose. the gauge would go on the side of the fse regulator where the bolt is opposite number 2


will get a pic off the return line on mine in a min
midge
08-09-2009, 18:43
ah sorry i think i understand, 3 does nothing? and some people block it off, but theres no point because it doesnt do anything.

is that correct?
Justin..
08-09-2009, 18:43
no, you connect 3 to the return line
midge
08-09-2009, 18:48
i dont understand how? do i put a t piece on the return line and run the t bit to 3 ? where does the gauge go?

sorry if im being stupid!

do you or anyone else running one have pics?
Justin..
08-09-2009, 18:55
2 secs just sorting pics lol
Justin..
08-09-2009, 19:00
The gauge goes in number 5


http://i14.photobucket.com/albums/a341/justin_2k5/fsenumbered.jpg



number 3 connect to the pipe which was originally connected to the fuel line which was connected to the point arrowed below ( some people block it off )

http://i14.photobucket.com/albums/a341/justin_2k5/08092009209.jpg
midge
08-09-2009, 19:03
ok, so do i block off the bit on the fuel rail and instead run the fuel line straight to the fse ?
sideways danny
08-09-2009, 19:04
my advice is DONT
Justin..
08-09-2009, 19:06
ok, so do i block off the bit on the fuel rail and instead run the fuel line straight to the fse ?


Up to you. the pipe is redundant and yes it runs to 3 on the fse
midge
08-09-2009, 19:12
Ok in this new revised diagram, what do i do with A and B ?

http://i2.photobucket.com/albums/y48/52egdim/fsenumbered.jpg

(L)
Justin..
08-09-2009, 19:17
A connects to 3


B is left open or blanked. makes no difference
midge
08-09-2009, 19:21
Thankyou very much! just one last thing, if thats left open doesnt fuel piss out everywhere?

Dan, dont ?
Justin..
08-09-2009, 19:21
no mine is open and nothing comes out.
midge
08-09-2009, 19:22
oh and justin what did you steal that one way valve from?
Justin..
08-09-2009, 19:22
loadsa rovers have them



:)
bass_direct
08-09-2009, 22:10
my original return is left blank too..
sideways danny
08-09-2009, 23:07
Thankyou very much! just one last thing, if thats left open doesnt fuel piss out everywhere?

Dan, dont ?

they're AWEFUL. fine if you like totally random fuel pressure I guess